Components
COMPONENTS
ILLUSTRATION
|
*1 | NO. 1 HV BATTERY INTAKE FILTER |
*2 | BATTERY SERVICE HOLE COVER |
Inspection
INSPECTION
PROCEDURE
1. INSPECT NO. 1 HV BATTERY INTAKE FILTER
Click here
2. CLEAN NO. 1 HV BATTERY INTAKE FILTER
Click here
Installation
INSTALLATION
PROCEDURE
1. INSTALL NO. 1 HV BATTERY INTAKE FILTER
Click here
2. INSTALL BATTERY SERVICE HOLE COVER
Click here
3. CLEAR DTC
HINT:
If the message "Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display, clean or replace the No. 1 HV battery intake filter, and clear the DTCs to reset the learning values even if no DTCs are output.
Click here
Removal
REMOVAL
PROCEDURE
1. REMOVE BATTERY SERVICE HOLE COVER
Click here
2. REMOVE NO. 1 HV BATTERY INTAKE FILTER
Click here
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Hybrid Control System: Hybrid/EV Battery Current Sensor "A" Signal Stuck In Range (P0ABF2A). Hybrid/EV Battery Current Sensor "A" Circuit Short to Ground (P0ABF11,P0ABF15,P1CBB12,P1CBB14). Hybrid/EV Battery Current Sensor "
Hybrid/EV Battery Current Sensor "A" Signal Stuck In Range (P0ABF2A) DESCRIPTION Refer to the description for DTC P0ABF11. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate P0ABF2A Hybrid/EV Battery Current Sensor "A" Signal Stuck In Range The battery curren ...
