Inspection
INSPECTION
PROCEDURE
1. INSPECT FUEL TANK CAP ASSEMBLY
| (a) Visually check that the fuel tank cap assembly and gasket are not deformed or damaged. If the result is not as specified, replace the fuel tank cap assembly. |
|
| (b) Confirm that ID mark Z is printed on the fuel tank cap assembly. CAUTION: Make sure to use a fuel tank cap assembly that has the correct ID mark, or a malfunction may occur in the fuel system. |
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Hybrid Control System: Hybrid/EV Battery Cooling Fan 1 Circuit Short to Ground (P0A8111,P0A814B)
DESCRIPTION The battery cooling blower assembly speed is controlled by the hybrid vehicle control ECU. Power is supplied to the battery cooling blower assembly when the MREL terminal of the hybrid vehicle control ECU turns on the IGCT relay. The hybrid vehicle control ECU sends command signals (SI0) ...
