Inspection
INSPECTION
PROCEDURE
1. INSPECT FUEL TANK CAP ASSEMBLY
| (a) Visually check that the fuel tank cap assembly and gasket are not deformed or damaged. If the result is not as specified, replace the fuel tank cap assembly. |
|
| (b) Confirm that ID mark V is printed on the fuel tank cap assembly. CAUTION: Make sure to use a fuel tank cap assembly that has the same ID mark, or a malfunction may occur in the fuel system. |
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Maintenance: General Maintenance
Body BODY TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY (a) If necessary, tighten the bolts and nuts on the chassis parts listed below. Front axle and suspension Drivetrain Rear axle and suspension Brake system Engine mounts Other chassis parts (b) If necessary, tighten the bolts and nuts on the body p ...
